Qualify for

DSL

Internet
Check Address Only
Phone Number:
Address:
Unit Type and #:
 
City:
State:
Zip Code:
This is a:
Residence Business
   

Co-Location Services

Prequalify for Service!

ETI's Co-Location services allow you to place your server or equipment inside our Network Operations Center [NOC] giving you direct access to the backbone with substantial 24/7/365 bandwidth, monitored under the watchful eye of our technicians and automated monitoring systems.

A network operations center (NOC) is a place from which a telecommunications network is supervised, monitored, and maintained. Enterprises with large networks, as well as large network service providers, typically have a network operations center, a room containing visualizations of the network or networks that are being monitored, workstations at which the detailed status of the network can be seen, and the necessary software to manage the networks. The network operations center is the focal point for network troubleshooting, software distribution and updating, router and domain name management, performance monitoring, and coordination with affiliated networks. It is the heart of a network.

For co-locating your equipment we offer:

8 static public IP addresses (6 usable)
99% uptime guarantee
Daily and weekly backup (on-site & off-site)
UPS services
Security services
Optional customer auto-alert (email, pager, fax, cell phone)

   Service Types:

PRO UNLIMITED [Unlimited Data Transferred (no additional bandwidth usage costs)]:

  • S10 (Shared 10M Hub port)

    Your equipment is connected to a 10Mbps ethernet port on a hub containing 8 ports or less, which provides a full burst speed of between 1.25Mbps up to a full 10Mbps wire speed upstream and downstream 24/7/365.

  • D10 (Dedicated 10M Hub port)

    Your equipment is connected to a 10Mbps ethernet port on an ethernet switch, which provides a full 10Mbps wire speed upstream and downstream 24/7/365.

  • D100 (Dedicated 100M Hub port)

    Your equipment is connected to a 100Mbps ethernet port on an ethernet switch, which provides a full 100Mbps wire speed upstream and downstream 24/7/365.

Additional Information:

  • Servers will be physically located at our East Coast NOC in NJ with direct connectivity to our backbone.
  • All hardware and software components provided by ETI remain the property of ETI.
  • Rates apply to each collocated server/equipment.
  • This service allows for unlimited megabytes (MB) of data retrieved per month. There is no bandwidth billing whatsoever.
  • Additional fees for SSL certificate costs apply, if needed.
  • Customer must provide proof of anti-virus implementation on Customer Server.
  • Customer equipment must have 10Base-T (RJ45) connectivity option.
  • Customer equipment must allow ETI to capture SNMP variables from customer equipment for purposes of monitoring.
  • Additional IP addresses are available.

BIZ MEASURED [Measured Data Transfer]:

Your equipment is connected to a 10Mbps ethernet port on a hub containing 8 ports or less, which provides a full burst speed of between 1.25Mbps up to a full 10Mbps wire speed upstream and downstream 24/7/365.

All the same services apply as the PRO UNLIMITED except the Data Transfer Bandwidth is not unlimited and is instead measured as follows:

  • MS10-10 (Shared 10Mbps Hub port with an allotted bandwidth of a full 10GB per month)

  • MS10-20 (Shared 10Mbps Hub port with an allotted bandwidth of a full 20GB per month)

  • MS10-30 (Shared 10Mbps Hub port with an allotted bandwidth of a full 30GB per month)

Additional Information:

  • Servers will be physically located at our East Coast NOC in NJ with direct connectivity to our Backbone.
  • All hardware and software components provided by ETI remain the property of ETI.
  • Rates apply to each collocated server / equipment.
  • This service allows for an allotted amount of gigabytes (GB) of data retrieved per month. Overage bandwidth billing applies.
  • Additional fees for SSL certificate costs apply, if needed.
  • Customer must provide proof of anti-virus implementation on customer server.
  • Customer equipment must have 10Base-T (RJ45) connectivity option.
  • Customer equipment must allow ETI to capture SNMP variables from customer equipment for purposes of monitoring.
  • Additional IP addresses are available.








Sign Up for Promotions





Powered by VerticalResponse


ETI Premier Strategic Partners [PSP]
ETI Premier Strategic Partners: Cisco ETI Premier Strategic Partners: 3Com ETI Premier Strategic Partners: Dell
Copyright 1994-2008 ETI,L.L.C. | Privacy Statement